|
 |
Classifieds |
|
|
Do you have parts that you want to sell?
Are you looking for a special part?
Email us and we'll post your ad here for others to see.
Be sure to give your name, description of what you are selling or looking for, and the best way to contact you.
We did have several ads posted last year. If you would like your ad to be posted here, please let us know...just in case you are still looking or trying to sell.
Posted: December 3, 2012
I have a cub cadet 102 for sale runs great would make a good pulling tractor still has the deck if you want to mow $250.00 obo call Matthew 724-744-4797 or Dominick 724-744-4292
Posted: December 3, 2012
I have a Forged Vogel Crank stock stroke for a 12-14 H.P. with cam gear with three runs on it, $275.00. A Lakota 420 on a 107 grind cam with three runs, $225.00. A Kohler 18 H.P. cam, $80.00. Mid West gear set 22 tooth and 23 tooth second gear and third gear set with three runs, $135.00. Mid West gear set 21 tooth and 22 tooth second and third gear set new never used, $155.00 Copper head gasket .062 thickness new, never used, $23.00. J.E. piston and connecting rod with good rings, $250.00. New set of rings for J.E. piston, size 3.530*, $37.00. 30 Carter Carb. completely rebuilt, opened up to a 1.2. with bottom high speed fuel adjuster set up for gas done by Brian Miller, $275.00. Aluminum Clutch Hub from Vogel, $35.00. New Cooling Fan, $27.00. New Exhaust Flange with mounting bolts, $25.00. If interested contact Bill Peden at 724-494-8294 or E-mail goonpeden@Gmail.com
Posted: December 3, 2012
For Sale: Half-Pint style tractor, with open RPM 25hp Kohler Command engine. It has 7.25" Dart rear-end setup, w/ 21,23,24,25 gears, HD ring and pinion and 13 tooth installed. Dick Cepek 26X12X12 (chevron) tires on rear (New), 4X6 Tri-Ribs on Douglas rims. 38lb Steel flywheel (Newly Balanced), MWSC Cam, Titanium Valves (New), JE Pistons and Rings (New), MWSC Billet Rods, Dyna Crank Trigger Ignition System (New), 2 into 1 Exhaust, Custom Intake for a Mikunni 44 carburetor system (New), Eqqus 10K Tachometer, Holley Black Fuel Pump and Regulator (New), MWSC 5 Puck Clutch System w/ 6 pin driver (New). Tractor has obviously the best of everything in it and motor was professionally built and owner will get dyno sheets with tractor, I know I missed more information, and have over $17K invested and when ran finished in top 4 of points in class, but due to a family loss, must sell for a loss, will make someone a happy puller! SERIOUS INQUIRIES ONLY call for further information. Call or text to 217-257-7934 or email mljscott2004@yahoo.com Item is in West Central Illinois and Pictures are available upon request.
Posted: December 3, 2012
Looking for a tractor sold a few years back called Internasty. Would like to buy. Any info would be appreciated. Thanks. Call Daryl 502-376-1416
|
| |
| Posted August 9, 2012
Tractor for sale. Asking $3000. Call Terry at 724-329-1437 |
Posted: May 4, 2012
Vorhees-Nichols Nos Stock Altered OUTLAW, aftermarket Midwest Block, Mid West Steel Crank,Billet Head,J E Piston,Mid West Billet Rod, Hackman Steel Cam,JRS Alcohol Carb,Billet Aluminum Closure Plate,25lb Flywheel,12lb Steel Starter Pulley,Lakota point set up,Less than 48 hours since freshened 47HP.asking $3800. Neg. call John 814-777-0487 or E-mail ejhipro@verizon.net

Posted: May 4, 2012
For Sale B.O; I have a Kohler K 341 from a John Deere 300 for sale. It runs..but not for long. This motor was rebuilt 10 years ago and had the crank turned at that time. I had problems with it a couple years ago. I did not want to invest the $800.00 in a new crank, so I put a cheap rod and piston in it. The crank was .003 out of round at the time. I managed to nurse a couple more years out of it, but the rod is on the verge of coming out of it now. The K 341 for sale AS IS. I am sure it would be a valuable short block for a puller or someone that builds pulling engines.
If you are interested, please e-mail me at this address: Frank Spithaler imnobs@zoominternet.net or call 724 816 8763 AFTER 4:00 p.m. weekdays, anytime weekends.
Posted: May 4, 2012
I have 2 tractors for sale. Both pull in our club and are competitive in the 16hp classes.
The first is a John Deere 210 with a stock body, (Could use to be painted). It has a stock Kohler (K-241) 10hp motor with a 30 carburetor on it, shifter lock, Wheelie bars. New Carlisle 23.5X10.5X12 Tires, not been cut. Under seat weight box, Under Belly Weight bars, and front weight bar. I am looking to get $800.00.
The second is a John Deere 214 with a custom body, it is bare aluminum, that resembles a winged sprint with round aluminum fenders and diamond plate foot boards, with foot feed throttle. It has a stock Kohler (K-321) 14hp motor with a 30 carburetor on it, larger side pulley and single belt drive that increases ground speed, Shifter lock, Wheelie bars. New Carlisle 23.5X10.5X12 Tires, not been cut. Under seat weight box, Under Belly Weight bars, and front weight bar. I am looking to get $1,000.00.
No weights are included but, are available for sale upon request.
They were both ran 2 seasons and did well, then I got stupid and moved up into the twin class, don't have time to run all the tractors myself and room in my trailer. Would rather see someone get them and enjoy them than have them go to waste. My loss is your gain here. I have more invested than I am asking for either one.
E-mail mljscott2004@yahoo.com , text, or call me at 217-257-7934 me if you're interested, I have pictures available to send for your inspection. They are located in West Central IL.
Posted: May 4, 2012
Pulling tractor for sale
Strongstown PA 582 International Cub Cadet Pulling Tractor built for pulling transfer sled turn key and go, RUNS GOOD!! 20 hp Kohler V twin engine, Has fully built rear end with a 20/21 gear set Full Midwest spool and axle Aluminum housing and axle tubes, Midwest drive shaft 4 puck ceramic clutch Red clutch spring billet pressure plates, Fully adjustable hitch with wheely wheels Aluminum weight pan and adjustable front weight boom Douglas aluminum wheels whole way around with Tri rib front tires and 26/12/12 vm 07 rear pulling tires Won MANY PULLS selling because just getting out of pulling and ready to sell! Asking 3200 obo NO TRADES Plenty of extra parts if needed
Call: 724 840 7645 email: CAM2184@sru.edu
Posted: June 17, 2011
Custom pulling tractor for sale. 650 suzuki engine. Runs great $2500.00 Will not deliver, you will need to pick up. Call Kathy at 301-432-6973 in Rhorersville, MD
Posted: May 1, 2011
For Sale: Cub Cadet 12 HP. Seat has been changed, NO weights included-As Is! Price $1,000. Call Derek at 724-984-5771.
Posted: April 23, 2011
For Sale: 2 Kohler Engines. 14 HP $275, 12 HP $200. Also 125 Cub Cadet hydro and 129 Cub Cadet with three point hitch. Call Rick Rimel 724-880-6927.
Posted: February 22, 2011
John Deere 12hp pulling tractor. No work needed, ready to pull. Asking $1000 obo. Call 724-845-6860 after 5pm.
Posted: February 3, 2011
CH18S with 20hp linkages to make it 20hp...bone stock out of the box.. very low hours..$600.00 724 875 0984
Posted: December 5, 2010
For Sale: 100% stock 20 hp overhead valve motor. exhaust included. $500. Call Ernie 724-331-2410.
Posted: October 12, 2010
For Sale: 16 HP tractor ready to pull. As Is $2000. Call Ernie 724-331-2410.
Posted: August 10, 2010
For Sale a 582 Cub Cadet pulling tractor about 80-90% done. We started the project and decided not to complete it - this would be a great opportunity for someone looking to get started in the Overhead Valve Twin Class. What I have:
- 582 Frame set up for Kohler Command V-Twin engine - basically everything minus hood, grille and side panels. I can give you a source for remaining items at a reasonable price! Frame includes mid bearing support and pillow block bearing for driveshaft. Everything lined up and ready to go!
- Old style straight front axle and custom spindles for dropped nose with 8" tri-rib front tires on steel wheels. Steering column, dash tower, plastic dash cover and steering wheel included. 52" wheelbase. Fenders and flat aluminum seat with backrest included as well as shifter lock bracket.
- Telescoping front weight bracket with aluminum deck plate weight box
- Mid weight bar - round with mounts welded to frame
- Complete rear end set up with good top shaft, billet shifter forks and 19-21-23 gears and solid axle - includes both 12 and 13 tooth pinions
- CH18 Command V-Twin Engine Complete (minus starter) and 100% STOCK - includes aluminum hub and 6 pin driver - just add your stock or aftermarket clutch. Clutch frame hanger included.
I would like to sell the whole thing COMPLETE for $2700 and will discuss reasonable offers. My loss is your gain here - try to build one for what I am asking - believe me I KNOW! I don't have any photos yet but will take some for emailing shortly.
Call Bruce Wise at 412-427-3355 mobile
Posted: May 28, 2010
4 sale or partial trade: 3 CONTAINER TOTES full of Misc. Dale Earnhardt items, from diecast, t-shirts,books, magazines, glass,etc. Way too much to list. You want it, I probably have it. I would like to sell everything, but I will separate some things. I would take a partial trade or full trade on, widened 10.50 rims and tires, front tri rib tires, or a 1 or 2 bag cement mixer (good shape) or any other pulling tractor items. Contact me at jason2856@live.com
Posted: April 28, 2010
Cub Cadet 582 16 twin briggs, 3 speed internal brake trans with deck (needs some clutch work) $450.00.
Wheel horse C160 Wheel horse pulling tractor. Needs pulling tires and weights to go pull $600 OBO.
Many engines for sale from rebuilt Onan flathead, to Kohler flathead twins. Parts, blocks, cub tin work.
Email Dan at inkdhellraiser@aol.com or call 724-875-0984
Posted: April 20, 2010
lakota double disc clutch $300 .....vogel rod 5.875 and JE piston 4in. $125 also have a stock 16hp..... 8in. 23lb. steel flywheel and probly more parts lying around if u would need something call the garage 724-455-2059 tell 'em Will sent you.
Posted: April 20, 2010
16 S/A NQS Legal, recast block, Vogal Steel crank, billet rod, aftermarket piston, Lakota cam, Lakota pro flow 1 inch carb, billet starter pulley, billet bearing plate, billet head, billet valve cover. Call or e-mail for more details $2500. Firm
Also Kohler 12 block bored 30 over port and polished, $100.
23 H.P. v-twin Kawasaki, motor is disassemble but is all there, it will need new head gaskets. 200 OBO
1000 Cub Cadet, no deck but the rest is there, not too beat up, not too much rust, has all the side shields, 1 front flat tire, has 10 horse Kohler will run needs muffler, coil, and battery. $400 OBO
cubpuller1982@aol.com
502-269-0141
Posted: January 24, 2010
Wanted: Set of Firestone 26x12x12. I will trade new big bar Cepek or cash. Tires must be new or in good condition, not double cut. Call Joe Fitzpatrick at 712-269-1369 or email dccountrysidegifts@yahoo.com
Posted: January 24, 2010
For Sale: Allis Chalmers 716 6 speed with or without mower deck. Call Scott at 814-279-9211 or email tractorman@shol.com
Posted: October 18, 2009
Kohler Engine parts and blocks from 14-16 HP. Contact Dan 724-875-0984 or email InkdHellRaiser@aol.com
Posted: June 24, 2009
1982 Ford F150. 351 Modified 400 four wheel drive, four speed. Three inch body lift kit with flatbed. I have extra parts. Asking $1000/obo. I will also trade for a good running pulling tractor. Contact Raymond tractor_man74@yahoo.com
Posted: June 24, 2009
ATV/Motorcycle/Dirtbike Service and Repairs. Contact Dan at 724-875-0984 or InkdHellRaiser@aol.com
Posted: April 29, 2009
Wanted: 20 hp command block. Call 724-880-0280, Dave Richter
Posted: March 26, 2009
Wheelhorse C-160 pulling tractor stock 16HP Kohler. All you need is weights and pulling tires and you are ready to go. $600. Call 724-875-0984
Posted: January 12, 2009
1966 Cub Cadet 122 pulling tractor/garden tractor, currently set up to pull with 12x10.5 ag tires (bars have been cut and only have about 3 pulls on them), widened rims, welded rear end, custom fully adjustable hook hitch, custom wheelie bars with wheels, Kohler k301 with less than 20 hours on it, Vogel cam (I don't remember the part number), Shaved head, K&N Air filter with Midwest super cub adapter, accel coil, mini tach digital tachometer/hour meter, brand new battery, creeper drive, Carter carburetor (adjustable), and red clutch spring. Has a good transaxle that has never popped out of gear while pulling or otherwise. If your looking for a tractor to cut grass with I also still have the deck, pto clutch assembly, and lifting assembly. I also have a set of narrow ag tires already mounted on steel wheels, a spare front swingarm, tie rods, and steering shaft. The tractor is rust free with very light corrosion in the battery box, deck is also completely rust free. $1100 for the tractor in pulling form as is, $1300 with deck, pto clutch, and lifting mechanism, $1400 takes everything I have for the tractor. All reasonable offers are welcomed. Please contact me 724-757-7506, ask for Dan. Thank you.
Posted: June 16, 2008
582 Cub called "Outlaw." 20 HP v-twin, needs new rings, fully built rear end, Mid West clutch. Ready to pull. $2500 obo Call 724-875-0984.
Small open trailer, 4x8, like brand new. $500. Call 724-875-0984.
Posted: April 30, 2008
582 Cub Cadet mowing tractor. 50" mowing deck. $850
2084 Super Cub frame. No motor. Includes 2 brake pedals, one for each wheel. $500.
If interested in any of these items, call Richard Johnson 814-443-2198
Posted: March 24, 2008
John Deere 212 Pulling Tractor. Excellent tractor, runs great, super clean. Aluminum weight pan, new front wheels and tires, motor has little time on it. $1,300/OBO. Call 724-255-0058.
Posted: July 9, 2007
1971-1974 Cub Cadet. Twin 18 HP. All metal with deck. Has points generator. $400 as is. Call Gene Eperjesi 724-317-5138.
Posted: July 9, 2007
Cub Cadet 1200. No Motor. Call 724-455-2295.
|
|
|
|